Sensors
Integrated Sensors
Find IoT sensors already integrated with EdgeKinect.
Discover Plug-and-Play IoT Sensors for EdgeKinect
We partner with industry-leading sensor manufacturers including TWTG, Milesight, Tektelic, Dragino, Yokogawa, SignalFire, and many more to bring you production-ready integrations.
Browse the list below to find sensors that work seamlessly with EdgeKinect out of the box.
Need something custom?
Create Your Own EdgeKinect Profile
Filters
Filters
Showing 15 of 30 sensors
Milesight EM500-LGT LoRaWAN Outdoor Light Sensor
The Milesight EM500-LGT is an outdoor LoRaWAN light sensor measuring 0-100,000 lux with a one-second response. Its 3m cabled IP67 probe suits greenhouses, fields and harsh sites, and a 19000mAh battery supports up to ten years of operation.
RIOT TLM101 Wireless Tank Level Monitor
The RIOT TLM101 is a self-contained ultrasonic wireless tank-level monitor that screws into a standard 1-inch NPT fitting in about two minutes. It pairs contactless level sensing with tilt and temperature compensation in a sealed IP67 enclosure.
Tektelic Tundra Cold Chain Monitoring Sensor
The Tektelic Tundra is a rugged IP67 LoRaWAN sensor for cold-chain environments, measuring ambient temperature and humidity from -40 to +70C. It accepts external probes and stores around 3,000 entries to prevent data loss during network downtime.
TWTG NEON Contact Sensor
Alerts on any deviations from existing Safety Protocols. Knowing the position of assets in an industrial environment or having certainty about the correct placement of assets provides insight into operational metrics.
Dragino LDS02 LoRaWAN Door Sensor
The Dragino LDS02 is a LoRaWAN door/window sensor that reports open and close events over long-range wireless. It counts open events, tracks last-open duration, and alarms when a door stays open too long. Two AAA batteries give multi-year battery life.
Milesight EM500-UDL Ultrasonic Distance/Level Sensor
The Milesight EM500-UDL is a non-contact ultrasonic distance and level sensor for harsh environments, measuring 0.25-5m at 1mm resolution over LoRaWAN. An IP67 enclosure and 19000mAh battery suit flood, wastewater and bulk-material monitoring.
TE Connectivity 69XXN Wireless LoRaWAN Pressure Transducer
The TE Connectivity 69XXN is a high-accuracy wireless LoRaWAN pressure transducer that removes hard wiring for remote process monitoring. Configured via Bluetooth, its 316L stainless body suits liquids and gases including steam and corrosive fluids.
Tektelic Aura Smart AC Switch
The Tektelic Aura is a LoRaWAN-connected smart AC switch combining local rocker control with remote on/off and energy monitoring. Operating as a Class C device, it reports line voltage, current, power and power factor, and supports 3-way installations.
Tektelic Vivid Smart Room Sensor
The Tektelic Vivid is a multi-sensor LoRaWAN smart room device monitoring occupancy, temperature, humidity, light and motion. Its 64-pixel PIR array delivers reliable ceiling occupancy detection, and a CR2477 cell gives 4+ years of battery life.
Milesight GS601 LoRaWAN Vape & Smoke Detector
The Milesight GS601 is a LoRaWAN vape and smoke detector for privacy-sensitive spaces like school restrooms. It fuses TVOC and PM sensors into a vape index to detect vapor, marijuana and cigarette smoke, with a 70dB buzzer and LED alarm.
Milesight UC501 Solar LoRaWAN Controller
The Milesight UC501 is a solar-powered LoRaWAN controller bridging field sensors via GPIO, analog, RS232/RS485 Modbus RTU and SDI-12. An embedded solar panel and batteries in an IP68 enclosure enable off-grid remote and agricultural monitoring.
Tektelic Breeze CO2 Smart Room Sensor
The Tektelic Breeze is a LoRaWAN indoor air-quality sensor monitoring CO2, temperature, humidity, pressure and light. CO2 is measured by an NDIR sensor across 400-5000 ppm with auto-calibration, ideal for ventilation and wellness compliance.
Vutility HotDrop Self-Powered LoRaWAN Current Sensor
The Vutility HotDrop is a self-powered split-core current sensor that clips onto a conductor and harvests its power from the line it measures, needing no batteries. It reports amperage and amp-hours over LoRaWAN, even from inside metal enclosures.
inteliLIGHT FRE-220-NEMA-L LoRaWAN Luminaire Controller
The inteliLIGHT FRE-220-NEMA-L is a LoRaWAN street-light controller that plugs into a standard 7-pin NEMA socket. It provides remote on/off/dimming of luminaires up to 400W with full electrical monitoring and an integrated light sensor.
Milesight WS302 LoRaWAN Sound Level Sensor
The Milesight WS302 is an indoor LoRaWAN sound level sensor measuring 30-120 dBA with A/C weighting. It reports equivalent (Leq), maximum (Lmax) and actual sound levels with no audio recording, ideal for offices, classrooms and hospitals.
Ready to Transform Your Business?
Join hundreds of companies leveraging IoT to drive innovation and growth.